Quest Bot - 2017.01.14, Version 3.00Z BETA

• Flight Navigation has been re-added to Quest Bot with major functionality improvements.
  • Quest Bot is able to switch between land and air navigation based on where the next navigation point is located. If the next navigation point is more than 5m above land, it will attempt to fly.
  • GENERAL TIPS FOR USING FLIGHT NAVIGATION:
    • 1) Don't use your mouse to turn or change your altitude.
    • 2) Use auto run as your way of moving instead of pressing/holding your forward key.
    • 3) Use your fly up/down keys to change your altitude.
    • 4) Use lots of space between navigation points and don't make any sudden direction changes.
    • NOTE: Following the above tips will aid in the most natural looking flight that is possible.

Quest Bot - 2017.01.14, Version 3.00Y BETA

• The Add Task Step and Edit Selected Step buttons on the main UI will now function differently.
  • Add Task Step Button - Will launch the Add Task Window with Add Step buttons.
  • Edit Selected Task Button - Will launch the Add Task Window with Edit Step buttons.
• Colour coded and bolded the text on the Add Task Step, Edit Selected Step, Duplicate Task Step, Add/Edit and Close, Add/Edit and New and Close buttons to be easier to read.
• Added the last saved path to the UI for Point to Point Navigation.
• Added a Test Task Steps routine to the Create Mode.
  • You can set a Task Step Number for where to Start and Stop testing.
  • NOTE: This is actually loading the task in Run Mode behind the scenes.

Quest Bot - 2017.01.12, Version 3.00X BETA

• Added the following commands to Quest Bot:
  • QuestBot: Actor_DoubleClick
    • Description: Double clicks an actor based on search criteria.
    • Parameter 1 = ForWho
    • Parameters 2 - 15 = Actor search parameters. (Ex. P2 = Distance, P3 = 20)
    • NOTE: Must be an even number of parameters. The pattern is query parameter followed by the query parameter value.
• Added an Edit Button to the Creator Mode UI.
  • To edit a Task Step, you must first select it. If you deselect it at any time, the buttons will revert back to adding new steps to the bottom.

BJ Zone Information - 2017.01.12, Version 1.05

• Corrected a bug that prevented Quest Bot from properly zoning out of solo instances.

Quest Bot - 2017.01.10, Version 3.00W BETA

• The QuestBot: Hail command will now face the target before hailing.
• Corrected a bug that would fail to properly load the Task File filters on the Setup Page. Some of you may now notice there are a lot of new content files available!
• Added the following commands to Quest Bot:
  • QuestBot: Open_Door
    • Description: Opens doors
    • Parameter 1 = ForWho
    • Parameter 2 = Door (Actor) Name
    • Parameter 3 = Door closed state value

BJ Quest Share - 2017.01.07, Version 1.07

• Updated the script to support changes made to how ISXEQ2 handles the character and questjournalwindow datatypes.

Quest Bot - 2017.01.07, Version 3.00V BETA

• Corrected a bug that would prevent QuestBot from loading itself on other sessions when the Start Task button was pushed.
• Corrected a bug that would clear the Task File combobox causing navigation paths to fail to load.
• Added a debug checkbox for the Navigation routine. It will display basic information like the navigation path name and the specific navigation point it is trying to reach.
• Added the following commands to Quest Bot:
  • QuestBot: Quest_Journal_Info
    • Description: Accesses the quest journal information.
    • Parameter 1 = ForWho
    • Parameter 2 = Quest Journal Command (SetReturnPoint, Check, IconCountEnabled)
    • Parameters 3 - 6 = Varies based on Parameter 2 choice.
  • QuestBot: Harvest_Quest_Item
    • Description: Harvests a quest item (actor). You can provide additional parameters to narrow down your search.
    • Parameter 1 = ForWho
    • Parameter 2 = Actor Name
    • Parameter 3 = Actor Member (TintFlags)
    • Parameter 4 = Parameter 3 Value

BJ Quest Share - 2017.01.04, Version 1.06

• Quest Share will no longer attempt to share quests when you are not part of a group.

Quest Bot - 2017.01.04, Version 3.00U BETA

• Corrected a bug that would crash EQ2 when you attempted to retrieve the current zone for making a queue.
• Corrected a bug that would crash Quest Bot that was related to checking your distance to the group leader when you were not in a group.
• Corrected a bug that would prevent you from properly resetting zone timers and looping when attempting to loop a single zone.
• Settings Page: Added a checkbox to ignore zone timers. This is intended to be used when looping overland zone tasks.
• Removed the following Task File filters:
  • Overland Quest
  • House Tradeskill Writs
• Added the following Task File filters:
  • Adventure Quest
  • Tradeskill QUest
  • Agnostic Instance Run
• Ogre Craft Support has been added back!

Quest Bot - 2016.12.31, Version 3.00T BETA

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023
• The Quest Bot version prior to Version 3.** has had it's command renamed to: BJ QuestLegacy
  • Quest Creator has had it's command renamed to: BJ QuestLegacy Creator
  • The command to end the version of Quest Bot prior 3.** has been changed to: BJ End QuestLegacy
• Quest Bot Version 3.** has had it's command renamed to: BJ QuestBot
  • Added an End command for Quest Bot 3.**. You can now type the following to end the script: BJ End QuestBot

BJ Zone Information - 2016.12.31, Version 1.04

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

BJ Loot Manager - 2016.12.31, Version 1.07

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

BJ Quest Share - 2016.12.31, Version 1.05

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

BJ Shuffle - 2016.12.31, Version 1.053

• Removed the ISXEQ2 API Version check as it really wasn't needed for a script of this size.

BJ Consumable Manager - 2016.12.31, Version 1.05

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

BJ Player Scanner - 2016.12.31, Version 1.04

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

BJ Class Manager - 2016.12.31, Version 1.05

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

BJ Inventory - 2016.12.31, Version 1.64

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023
• Added price match support for Cae'Dal Merchant Crate and Ascended Merchant Crate.
• Corrected a calculation error that would affect price matching not correctly matching the lowest price.

BJ Movement - 2016.12.31, Version 1.99

• Updated the ISXEQ2 API Version to be compliant with the ISXEQ2 changes on 20161220.0023

All 12 Week+ EQ2 Related Products - 50% Off Discount

Starts: December 24, 2016

Ends: January 7, 2017